■ ROHS Compliant: Yes
■ Features and Benefits
Thermal conductivity: 0.8 W/m·K
Available in customized size, sheets
Easy to apply
Good reliability
Good thermal performance
Self-adhesive
■ Bornsun’s Thermal Adhesive Tape
BN-TAPE100, which thermal conductivity is 0.8 W/m•K, is one kind of
self-adhesive thermal interface material. BN-TAPE100 uses fiberglass as
reinforce carrier, getting protected by release film on surface.
BN-TAPE100 could take place of common sil-pad. It could bond
components and heat sinks by little pressure because of its excellent
bonding character. It requires no further fixing with screws which it
could help customers to save cost of labor.
BN-TAPE100 could be stable during–20～120 （℃）.
■ Application
To bond transistors and heat sinks
To bond PCB and heat sinks
To bond motor control and heat sinks
■ Notes
Please remove dust, greasy dirt and impurity and clean the surface before bonding
Please make sure that adhesive tapes contact with objects thoroughly
Please even the surface before bonding
Do not use right after bonding, please leave it 1 to 2 hours (at room temperature) before using
Do not peel off release film ahead of time if Thermal Adhesive Tapes are not about to be applied
Please store Thermal Adhesive Tapes in a cool, dry and well ventilate place.
BN-TAPE 100 is one kind of acrylic acid tape. When it’s to be bonded
with low surface energy material, other different bonding ways should
be used together.
